Shaanxi Aipu Solids Control Co., Ltd
Aipu Solids Control-All your solutions on solids control
Add to Cart
Oilfield drilling fluid Hunter-MG series shale shaker is the first class of drilled solids control during good drilling. Actually, the shale shaker can be only used in oil well drilling and also can be used in the HDD or piling desanding, the TBM, CBM either. Hunter-MG4 Shale shaker is a great piece of equipment to process drilling fluids.
| Flow rate | 660GPM |
| Vibration mode | Linear |
| Motor | 2.5HPx2 |
| Screen panel | 4 panels |
| Screen area | 2.73㎡ |
| Deck angle | -1~+5 (Customizable) |
| Feeder box | Mounted and top open with the flange inlet port |
| Deck number | 1 |
| Base | Single deck or dual tandem, triple tandem (Customizable) |
| Electrical system | 220-415V/50Hz,220-460V/60Hz, 3Ph |
| Color | Cyan, blue, orange, red, yellow, green, etc. |
Hunter-MG4 shale shaker is a linear motion shaker and its capacity is over 600GPM. When operating a shaker in daily work the shaking force of vibrators is up to 7.0G. The feeder box is top open with the cover bolted well. But the inlet port is usually at the box wall center but close to the bottom. There is a division line at the feeder box base and controlled by a hand brake butterfly valve. The division line helps much on flow direction control, especially when we need to change the screens
Hunter-MG4 shale shaker is the 4-panel screen shaker. It's a single deck and single base shaker. However, it can be made as to the dual tandem and the triple tandem shaker. It also can be set together with the Hunter series mud cleaner. Hunter-MG4 shaker holding screen area about 2.73㎡. And the screen panels are fit by the wedge block for convenient installation and replacement on screens.
Screen panels for Hunter-MG4 are framed type. They can be steel frames and composite frames. The color of the screen panels can be yellow, green, and orange. Usually, the motors are Martin brand, while some are OLI or Ital-Vibras brand according to clients' preference and actual demand. The shaker deck angle adjustment is ranged -1~+5°. During operation, the deck angle is adjusted accordingly based on drilling mud condition, the condition of the cutting, and the flow rate situation
It's up to 660GPM. The high efficiency and the great separation effect surprise many clients. The flow rate means the capability the shaker can handle in one hour without mud loss or overflow. So when we run the shaker, there will be different condition requests shaker adjustment on deck angle or screen size
The uphill angle will help to get discharge drier, the downhill angle will help to get the flow rate increased since the mudflow velocity is higher.
We treat the Hunter-MG4 shale shaker as the original and initial shaker. Then there are many different options on different aspects. Such as the shaker deck, which can be a double deck. We call the single base double-decked shaker as Hunter-MG8. The Hunter-MG4 shaker can be dual motion we call it Hunter-MGD. That means the shaker same appearance and general design but holding dual vibration mode. Then, if 2 sets of shaker Hunter-MG4 made as dual tandem we call it Hunter-MG4x2.
Another different design is the feeder box inlet port position. We usually set it on the bottom side close to the feeder box base. But it can be set at the center or higher according to the client's preference. Of course, the internal structure may vary if necessary.
We provide customized options on color, too. According to our record recently, most of our clients select AIPU cyan. It's rather marked and beautiful. For screen panels, we can make them steel frames or composite frames. If clients request, they can be the corrugated pattern.
Besides common dual tame shakers, we produce the double-decked dual tandem shaker, too. Now the users ordered Double decked dual tandem shaker are very happy with our shaker quality and performance.
Do you need Hunter-MG4 shale shakers? Or you need some customization on any specification? Please contact us freely. You may need Hunter-MG3, Hunter-D series shaker, it's no problem. Please trust AIPU will be your ideal partner on shaker solutions and solids control.
Besides the Hunter-MG shale shakers, there are Hunter-D shakers. The difference is the screen installation way and screen area. Why clients select AIPU continuously?
High-quality with good performance. True cost-effectiveness. Many of our clients are introduced by our regular clients. And among the orders, almost all of them are repeat orders. Clients’ repeat orders tell many things and all of our users are satisfied with our shakers quality and our service
Now these shale shakers under manufacture are for oil well drilling solids control. Some are ordered along with the whole system, some are just single separated equipment
