Shaanxi Aipu Solids Control Co., Ltd
Aipu Solids Control-All your solutions on solids control
Add to Cart
APFI flare ignition device is also called flare ignitor or gas flame. It can be used for oil and gas drilling sites and gas stations, and the excess of toxic combustion gas discharged. Flare ignition on the degasser is connected to the combustion of harmful gases. In oil fields, it is usually painted red as a warning. The igniter may be diesel fuel or liquefied natural gas. When we burn gas from the degasser, the fuel tank will help the entire ignition.
Please check below technical specifications for your reference. And some configuration is customizable. Please contact us for more details
| Model | Torch Diameter | Height | Voltage | Ignition voltage | Ignition frequency |
| APFI20/3 | DN200 | 2.5~3.0m(Customizable) | 220V | 16Kv | 100~1000times/min |
Flare ignition means igniting the exhaust gas in the oil and gas industry. The poor boy which is connected to the degasser, a gas which drilling mud is discharged and separated from the gas, which is directed to flare ignition means.
It will eliminate the threat to the environment and the safety of hazardous or toxic combustion gases through the igniter. Each flare ignition device will operate together with a mud gas separator. They will be connected to the exhaust gas line or discharge line. They are widely used in oil and gas drilling.
In addition to the conventional torch igniter, Aipu also produces an ignition device with a solar panel. Charging the battery in the sun. The use of green energy can be more environmentally friendly.
Ignition means for each of the flares, the burner will be arranged, the control panel, the joint, with a small tank of LNG. Between the ignition and the fuel line has a flame arrester, to ensure safety during the ignition operation
There is the arrestor, the torch, the flame pin, the control panel, the fuel tank, or the connection line. If we use diesel oil as fuel, there will be no diesel tank but the connection line between the ignitor and the fuel tank at the site.
Some flare ignition device is powered by a solar panel. This configuration is more and more popular. It's more environmentally-friendly and convenient to get the power source.
Depending on the installation, there are vertical and horizontal. This means that the flare port direction parallel or perpendicular to the ground surface.
The fuel-based materials, there are LNG flare ignition or diesel torch igniter. Considering the power, and solar electric gas flame.
If the control mode is considered, there is fixed a control panel and remote control gas flame. In addition to the division, we can also customize the gas flame according to the user and the actual operating conditions. For example, we created a super high gas flame as an oil drilling company. Overall height of about 5m.
For any questions or demands, please feel free to contact AIPU solids. You will get a free offer on an optimal solution, you will get a professional proposal very soon.
